NOVADURIT N 111 50 g flask

NOVADURIT® N 111 is a high-strength, one-component anaerobic resin with capillary effect to secure threaded joints already created, to seal hair-thin cracks and porous places in cast iron, its alloys, and welds. Recommended for threads up to M36 and maximum clearance 0.05 mm. Green colour.

- For threaded joints
- Capillary effect
- High strength
- Seals cracks
- Max. clearance 0.05 mm

Procedure of pasting cracks
1. No liquid may be running out of the crack; it must be dry and clean. The maximum temperature of the cast iron should be 35 °C.
2. Degrease the surface thoroughly and remove oil from the crack, best using TECHNOSOL®, and them dry the crack as well as possible using compressed air.
3. Apply NOVADURIT® N 111 to paste the crack in all its thickness. Continue applying it until it stops being absorbed. After application, let the sealed crack at rest for about 3 hours. Application can be repeated after about 7 hours.
4. Then let the putty harden for about 12 hours at the minimum.